Powered by high-torque 25 HP (19 kw) Kubota® diesel 898cc Engine, Fast ground speed of 11.2 mph (18 km/h).
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
The Kubota 25 hp (18.6 kw) liquid-cooled diesel engines are geared for high torque while also delivering fast 11.2 mph (18 kph) ground speeds. The powerful, yet fuel-efficient engines come in a compact package that is exceptionally well balanced for low vibration. The liquid-cooled system ensures cleaner combustion and extended engine life.
Machine: 5 year / 1200 hour
Engine: 2 year engine warranty.
Kubota D902-E2B-TORO-3, 25 hp, 3 cylinder diesel
3.8 cm to 12.8 cm with 6.4 mm increments. Foot operated lift assist.
132.0 cm (52.0 inches)
Right side discharge, three blade mid-mount rotary. Fabricated 7-gauge steel Turbo Force deck with welded reinforcements, mounting brackets, and gauge wheel brackets. The deck is suspended from the machine by four lift chains and attached to the rear wheel supports by two struts. The deck is supported with five adjustable gage wheels. The deck has an adjustable discharge baffle.
17.7 km/h – forward max.
10.1 km/h – reverse max.
Front – 13.0 x 6.5 inch - 6, 4-ply, smooth tread, flat free semi-pneumatic.
Rear – 23.0 x 9.5 inch – 12, 4 ply “Turf Master’ tread.
Tandem 16 cc Hydro-gear variable displacement pump assembly with shock valves. Twin Hydro-gear HGM 18E positive displacement pumps with heavy duty 3.175 mm (1.25 inch) tapered output shafts.
Our factory trained technicians understand how valuable your time is and ensure top-level maintenance and repairs for your valued vehicle, along with a variety of specialised work.Learn about our Workshop