$30,499 Ride Away
Model: 74945. Z Master Professional 5000 Series mowers offer rear discharge decks for increased productivity in taller grass.
Enquire NowThese EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Machine: 5 year / 1200 hour
Engine: 3 year engine warranty
Belts, Tyres & wear parts: 90 days.
Battery: 1 year (first 90 days parts and labour, balance of year parts only).
PS_ECV749-3064 19.8 kW (26.5 hp) as per J1940, Delphi EFI, V-Twin.
2.5 cm to 14.0 cm with 6.4 mm increments. Foot operated lift assist.
182.8 cm (72 inches).
Rear discharge, three blade mid-mount rotary. Fabricated 7-gauge steel Turbo Force deck with welded reinforcements, mounting brackets and gauge wheel brackets. The deck is frame supported with four adjustable gauge wheels.
16 km/h – forward max.
Front – 13 x 6.5 inch - 6, smooth tread, flat free semi-pneumatic.
Rear – 24 x 12 inch - 12 Turf Master.
Twin Parker unitised 12 cc pump and 237.6 cc wheel motor assemblies. 1.6 litre integrated reservoir, spin on filter, internal check valves and heavy duty components.
Our factory trained technicians understand how valuable your time is and ensure top-level maintenance and repairs for your valued vehicle, along with a variety of specialised work.
Learn about our Workshop